LARGE ITEM
POWDER COATING
One of Arizona's largest powder coating ovens, 10' × 10' × 30'. If it fits on the highway, it fits in our shop.
Trailers · Car Frames · Flatbeds · Gates · Industrial Equipment
⸻ WHAT WE HANDLE
no job too big.
seriously.
Our 30-foot oven was built for the jobs other shops turn away. Here's a sample of what we handle:
Truck Beds & Headache Racks
Full-size truck beds, flatbeds, and custom headache racks. We handle the full assembly, no disassembly required for most configurations.
Trailers & Trailer Frames
Utility trailers, car haulers, livestock trailers, and custom trailer frames up to 30 feet in length. One of the few shops in Arizona with the oven capacity to handle full trailer frames.
Car & Vehicle Frames
Full chassis, subframes, roll cages, and body panels for classic restorations, off-road builds, and custom fabrications. Bare metal prep included.
Flatbeds & Utility Bodies
Commercial flatbeds, service bodies, and utility beds for work trucks. We coat the full assembly in a single run for color consistency across all surfaces.
Gates, Fencing & Railings
Driveway gates, security fencing panels, stair railings, and balcony guards. Powder coating provides superior weather resistance compared to paint for outdoor metalwork.
AGRICULTURAL Equipment & Frames
Equipment frames, machinery housings, skid plates, and industrial components. We work with contractors, fabricators, and industrial clients throughout Northern Arizona.
Architectural Metalwork
Custom architectural elements, canopies, pergola frames, and decorative metalwork for commercial and residential projects. Any color, any finish.
Signage & Monument Frames
Large commercial sign frames, monument sign structures, and wayfinding hardware. We've coated county and municipal signage throughout the White Mountains region.
⸻ Why apex?
Most Shops Say No.
We Say Bring It.
The majority of powder coating shops in Arizona operate ovens that max out at 8–10 feet in length. That means full trailer frames, car chassis, and long flatbeds simply can't be coated in a single pass, or at all.
Our 10' × 10' × 30' oven was a deliberate investment to serve the contractors, fabricators, ranchers, and off-road builders in Northern Arizona who need a shop that can handle their real-world projects.
Single-pass coating for full trailer frames
No seams or color variation from multi-pass coating
In-house sandblasting for complete prep-and-coat service
Experienced technicians who understand large-part geometry
Competitive pricing with no oversized surcharges
30 FT
MAX PART LENGTH
6,500+ FT
COLORS
⸻ THE PROCESS
How Large Item Coating Works
01
Call or Submit a Quote
Tell us your part dimensions, material, and desired finish. We'll give you a quote over the phone or email, no need to bring it in first for most standard items.
02
Drop-Off & Inspection
Bring your part to our Show Low facility. We inspect for rust, damage, and prep requirements. We'll confirm the final scope and timeline before any work begins.
03
Sandblasting & Surface Prep
After fabrication, the part is sandblasted to bare metal. This removes all weld spatter, mill scale, and surface contamination, creating the anchor profile needed for maximum coating adhesion.
04
Powder Application
The part is hung or racked in our spray booth and coated with electrostatically charged powder. Our technicians ensure complete coverage on all surfaces, edges, and complex geometry.
05
Full-Length Oven Cure
The part enters our 30-foot oven and is cured at 400°F. The full-length oven means no repositioning, no seams, and consistent color across the entire piece.
06
Inspection & Pickup
Every part is inspected before release. We'll call you when it's ready. Large items can be picked up with a trailer, we'll help you load safely.
⸻GOT QUESTIONS?
LARGE ITEM FAQ
Our curing oven measures 10 feet wide × 10 feet tall × 30 feet deep, making it one of the largest powder coating ovens in Northern Arizona. If it fits on a standard highway, it fits in our shop.
In most cases, no. We prefer to coat assemblies whole for color consistency. However, if there are rubber seals, wiring harnesses, or plastic components that can't be masked, we'll advise you on what to remove before drop-off.
Yes. We regularly coat full car frames, chassis, and subframes for restorations and custom builds. The part needs to fit within our 10' × 10' × 30' oven envelope. Call us with your dimensions if you're unsure.
Our racking and hanging system is built for heavy industrial parts. We can handle most items up to several thousand pounds. Contact us for very heavy items so we can confirm our rigging can accommodate your load.
Most customers trailer their items to our Show Low facility. We have a loading dock and can assist with unloading. For very large items, call ahead so we can prepare the appropriate rigging.
Yes, and we strongly recommend it for large items. Proper surface prep is critical for adhesion on large parts that are exposed to the elements. We offer in-house sandblasting as part of a complete prep-and-coat package.
Still have questions? We're happy to help.
Got a Big Project?
We're Ready for It.
Call us with your dimensions and we'll give you a quote on the spot. No oversized surcharges. No turned-away jobs.
